Welcome to www.waterfillingmachine.com

5 Gallon Bottle Blow Molding Machine

» PET BOTTLE BLOW MOLDING MACHINE » 5 Gallon Bottle Blow Molding Machine

5 Gallon Bottle Blow Molding Machine

  • Specifications
  • Key Features

Technical Specifications

Model HZ-90
No of Cavity 1
Applicable Preform Material PET/PAMM
Bottle Size  10-25 L
Output Capacity 75-90 BPH
Max Bottle Height 450 mm
Max Bottle Diameter 350 mm
Max Mould Plate Dimension(LxW) 520×600 mm
Max Mould thickness 400 mm
Clamping Force 300 KN
Power Consumption 30 KW
Power Supply 220~380V/50~60 HZ
Machine Dimension(L x W x H) 2.05×0.95×2.14 M
Machine Weight 1500kgs (approx)
Preheater Dimension(L x W x H) 2.65×0.78×1.85
Preheater Weight 500 kgs (approx)
  •  Specifications are subject to change without notice, All rights are reserved.
5 Gallon Bottle Blow Molding Machine
5 Gllon bottle blow molding machine is ideal for bottling plants looking to manufacturing PET bottles on site and reducing cost and saving storage space. It is designed for 3 gallon, 5 gallon and other wide mouth bottles, speed of 75 bottles per hour can be achieved. Machine is manufactured with heavy duty tubular frame, infrared reheat units to achieve uniform heating throughout the wall of preform, special designed preform heating system to ensure the optimal heating effect for thick preform, special designed fan-cooling system in the heating channels to keep the oven with constant temperature and ensure the preform can be heated completely, microprocessor control for easing setting, easy to operate without special training, low cost maintaining.
5 gallon bottle stretch blow molding machine works a simple principle. The stretch blow molding process starts by loading preforms into the preheater. The preheater uses a variable speed track that moves the preforms through a heating tunnel. The heat tunnel has specially designed heating elements for a consistent heating operation with minimal maintenance.
When the preforms have made one trip through the preheater, they are manually loaded one at a time into the blow molder. Operator presses the two mould close buttons to close the mould which is specially designed for safety operation. After the bottle is formed in the blowing cycle, they are removed and the cycle continues.
Key Features


  • Reduce transportation cost When shipping empties, you get 2100 bottles in a 20 feet container,compared to 15,000 preforms
  •  Tighter inventory control, make your own bottles when you need them, minimizing inventorystorage and vendor deliva problems
  •  Microprocessor controls blow molding process for precision heat control, speed
  •  Built primarily of coated steel; easy to clean and maintain
  •  Easy to use. One operator. (Approximately 30-40 sec. between emerging heated preforms, to allow operator to blow bottle and return for the next one.
  •  Environmentally friendly; PET bottles are easily crushed and recycled

Enquiry Form ( we will get back you as soon as possible )


3 + 6 = ?

Maybe you like also